• Bright source for permanent fiber installations.
• Large fiber port accepts up to 800 1mm fiber optic cables
• Wide spectrum is achievable with full CMY color mixing system and full range dimmer
• 6000 hour lamp
• Indoor and outdoor application
• Features DMX control
• Stand-alone operation including real-time clock activation.

Specifications

General: Automated color-changing lunimaire employs 150-watt discharge lamp as the light source.
Mechanical effects: Provides subtractive CMY color mixing using dichroic glass color filters. Intensity of the light is adjustable by a mechanical dimmer that dims for 0 to 100% without loss of color temperature.
Control: Stand-alone operation executing defined or random color changes at programmable intervals and speeds. Built-in 24-hour real-time clock for control of operation start and stop times.
Housing: Plastic housing with an anodized-gray finish. Weather resistant.
Installation: Operates in any orientation indoors, or horizontally outdoors. Provides 5 x 13mm (1/2 in.) holes for mounting hardware.
Electrical: Operation settings for 50 and 60 Hz supplies from 100 to 250 volts.
Environmental: Ventilated areas at temperatures not to exceed 40°C (104°F)
Warranty: Two years limited warranty, excluding lamp.

Technical Data

Part Description
The Fiber Source CMY 150™ is an automated 150-watt color-changing luminaire for illuminating fiber optic cables in permanent installations. It features seamless CMY color mixing and full-range continuous dimming. The illuminator may be operated with DMX controllers, in synchronization with other units (with or without a controller), and in stand-alone mode with programmable start and stop times.

Environment
The Fiber Source CMY 150™ is designed for indoor or outdoor applications and is weather resistant, ingress protection class IP 44. This illuminator may be installed in any orientation indoors, or horizontally outdoors. The maximum operating environmental temperature is 104 degrees F (40 degrees C). When locating the unit, it is important to consider that the illuminator will increase temperature of the environment The volume of available air space directly effects the impact of the heat in the environment.