- Quieter Operation (28db)
- Higher Color Rendering (96 CRI)
- Stable Performance & Color Temp.
over lamp life span.
Lamp Performance
Lamp: 150 watt metal halide CDM-SA/R Color Temperature: 4200 Kelvin
Color Rendering Index: 96
Average Life: 6000 + hours.
Fiber Lumens: 2800 lumens measured from 300 - 1mm fiber, Clear Fused and polished one foot in length.
Net nominal luminous efficiency of light source 24 port lumens per watt. |
|
Specifications
UL, C-UL listed for dry and wet locations
Construction: Formed CRS housing, powder coat finish.
Ventilation: 56 CFM fan cooled.
Operational Noise: 28db
Available Voltages: 120V / 240V / 277V (component transformer, UL/CUL listed, wet/dry rated)
Ballast: Thermally protected electronic.
Power: 180 Watts total power consumption.
Color Options: White Light, Single Color, standard 8 or Custom 8 color wheel.
Control Options: Component Module with DMX 512 via XLR in/out connectors with preset or active control capabilities
Master Ferrule Capacity:
| 0.75mm fibers |
670 |
| 1.00mm fibers |
380 |
| 1.50mm fibers |
132 |
| 2.00mm fibers |
74 |
| 3.00mm fibers |
32 |
Safety Features: Thermally protected ballast and kill switch when cover is opened.
Dimensions: 11” Length x 6.5” Width x 7.75” Height
Weight: (TBD)
Warranty: One year (excluding lamp) from initial date of purchase. |
Technical Data
|
Part Number |
Part Description |
| SERIES |
LLS - 150 - D
LLS - 150 - W |
LyteLaunch - 150 for dry location applications
LyteLaunch - 150 for wet location applications |
| VOLTAGE |
- 120
- 240
- 277 |
120 VAC, 50/60Hz
240 VAC, 50/60 Hz
277 VAC, 60 Hz |
| COLOR OPTIONS |
- W
- S1
- S8
- C8 |
White Light
Single Color
Standard 8 color wheel
Custom 8 color wheel |
| CONTROL SYSTEM |
- X
- DMX |
No Control
DMX 512 Control (component module) |
WHEN ORDERING USE: Series - Voltage - Color Option - Control System
EXAMPLE: (LL150 - D - 120 - S8 - X) |
Part Description
The LyteLaunch™ 150 is a 150 watt metal halide light sources designed to illuminate both sidelight and end light cables. The LyteLaunch™ 150 is designed for architectural applications such as down lighting, accent lighting, cove lighting, and task lighting. The LyteLaunch™ 150 may be used to create brighter starfields, paver/tile surfaces, special effects, and sign applications. The LyteLaunch™ 150 is a compact design for its class of light source and is fitted with a simple cable connection ferrule system. This source includes a power cord and cable for remote switching of color wheel. Safety features built in are fuse protection, and cover cut off switch.
Environment
The LyteLaunch™ 150D is designed for dry indoor applications only. The LyteLaunch™ 150W is designed for wet applications. This illuminator may be installed in any position indoors and horizontally only outdoors. When planning for power for this illuminator, locate the illuminator within five feet of the power source. Allow for a twelve inch clearance for both the in-take and exhaust sides from any surfaces to maintain proper ventilation. When mounting multiple illuminators within close proximity, maintain a two foot clearance between each illuminator. The maximum operating temperature is 95 degrees F. |
